Skip to main content
ALL PARTICIPANTS MUST HAVE A WAIVER TO RIDE CLICK HERE FOR WAIVER

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

iSSi Keo Compatible Cleat
$24.99
The split-cleat system makes cleat swapping a snap – no need to worry about losing your cleat’s position. - Cleat Bolt Pattern: 3-Bolt - Cleat Compatibility: Pedal iSSi , Look KeO - Cleat bolts and washers included - 4mm hex wrench required to install
iSSi Thump (Molded Pins, Small)
$39.99 - $49.99
The concave shape and tall pins of the Thump composite pedal provides a "just-right" amount of traction—enough for the rigors of riding off-road—but with nylon pins to keep calves laceration-free on more casual rides. Two different platform sizes accommodate feet from small to Sasquatch. - Tough, nylon composite body - Chromoly spindles, sealed cartridge bearings and nylon bushings - Body: 18.5mm thick with 2.5mm of concavity for great control and pedal feel - Platform size: 113 x 95mm
absoluteBLACK Oval 64 BCD 4-Bolt Chainring
$58.99
absoluteBLACK Oval 104/64 BCD Chainrings greatly improve traction and climbing abilities. They are designed for use with all cranksets with a 104/64 BCD interface, including Shimano, SRAM, Race Face, FSA, and more. These chainrings allow you to run a 1x system without chain retention issues. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 9, 10, 11, and 12-speed Eagle compatible
absoluteBLACK Oval Direct Mount Chainring for SRAM 3-Bolt 3mm Offset
$83.99 - $139.99
absoluteBLACK Oval Direct Mount 1x Chainrings for SRAM greatly improve traction and climbing abilities. They are designed for SRAM cranks that have a 3-bolt direct mount interface and removable spider. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 3mm offset is designed for 141/148 Boost spacing on standard DUB/GXP/Long Spindle BB30, as well as 157 Super Boost spacing on dedicated Super Boost DUB cranks - Designed for GXP, DUB, and long-spindle BB30 cranks
Zipp Vuka Clip Riser Kit
$24.99
Vuka Alumina Clip Risers are designed for use with the Vuka Alumina Clip's above-bar option. The risers are designed to offer a wider range of adjustability within the Vuka Alumina aero-cockpit system.
Wheels Manufacturing Inc. 31.8 – 25.4 Handlebar Shim
$13.95
Shims for fitting 25.4mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 25.4mm - Length: 48mm - Machined Aluminum - Anodized Black
Wheels Manufacturing Inc. BB30A Outboard ABEC-3 Bottom Bracket
$99.00
The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: Cannondale BB30A - Bottom Bracket Shell Width: 73mm - Bottom Bracket Shell I.D.: 42mm - Over Bearing Width: 91mm in 73mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16 notch
Wheels Manufacturing Inc. Derailleur Hanger 167
$34.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - For carbon frames, use (2) M3x8 Flat head screws - For all non-carbon frames, use (2) M3x10 Flat head screws
Wheels Manufacturing Inc. Derailleur Hanger 172
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M6 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 25
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 339
$32.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Norco Part #913000-001 - Attaches to frame with (2) M4x8 flat head screws (sold separately) - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 38
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 49
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 53
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 67
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 94
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt (bolt only)
WTB Volt Steel Saddle
$47.95
The Volt is our most popular mountain saddle. Shaped for speed and comfort, time tested and proven, the Volt makes for an incredibly versatile saddle that has gained endless acclaim among riders. - Medium padding thickness and subtle curves make the Volt our most popular mountain saddle - An upward curved tail and gentle drop to the nose provide something to push against while pedaling - Steel rails
TruVativ BMX To Threaded (BSA) BB Adapter
$19.99
- Adapts American/Pro BMX frames with a non-Threaded 51.3mm (2.02") i.d. bottom bracket shell to accept English-threaded bottom bracket & crank applications - CNC-machined aluminum with three steel connecting bolts to prevent independent rotation
The Shadow Conspiracy Surface Pedals
$18.99
The new Shadow Surface Pedal is made with performance and function in mind. Starting with a wider and longer, slim platform. The wide 105mm x100mm platform is specifically shaped to be thin and stiff while still offering an overall concave shape. Added advanced micro-knurling and 12 pins per side for a maximum grip that still allows foot adjustments mid-shred. Made with the same proven nylon-composite material as the Ravager pedal, with a heat-treated chromoly axle that includes a 6mm broach for ease of installation and high-end looks. - Injection-molded nylon-composite body - Heat-treated 4140 chromoly broached spindle - 105mm length x 100mm wide - 3.5mm pin height - 12 pins per side - Thickness: 18mm and 24mm at bearing cover - 9/16"
Syncros Cork Gel Bartape
$16.99
The gel of this bartape effectively reduces hand fatigue while the sweat resistance helps prevent slippage, keeping your hands where you need them—on your handlebar.
Syncros RR1.5 Stem
$49.99
RR1.5 stems are designed with a low stack height and negative rise for road bikers looking to lower their handlebar position. They are made of high-grade aluminum to achieve the perfect balance of strength, stiffness and low weight. The body is 3D forged from an advanced 7075 alloy and the broad four-bolt faceplate design better distributes stress and lowers the clamping force required to secure the handlebar. - Designed for road use, but also suitable for mountain use - Forged and machined AL2014 body - 4-bolt face plate helps distribute clamping load - Corrosion-resistant Torx T25 steel bolts - Compatible with all 31.8 bars - 1 1/8" steerer - Includes stem top cap and bolt
Syncros Tofino R 1.0 Cut Out Saddle
$149.99
Our top Endurance orientated saddle, the regular Tofino saddle will fit the majority of riders, marked by a more upright position, seated more towards the middle to back of the saddle. These riders sit primarily on the sit bones and therefore the wider part of the saddle. The Tofino 1.0 features carbon fiber rails for the lightest weight. The cut-out version is for riders with a higher sensitivity in the symphysis region. Generally, riders are on the front part of the pelvis and central part of the saddle nose. The cut-out transfers weight to the bones to either side as opposed to the middle. Developed in conjunction with world-renowned bike fit company Gebiomized, this saddle has been designed to offer the maximum tailored bike fit solution for an off the peg saddle. - Additional padding and a relaxed geometry makes this saddle a hit across multiple disciplines - Carbon fiber-reinforced shell for a balance between strength and lightweight - Light and strong, oversized 7x9mm carbon rails - Light PU foam for comfort all day long - Pressure relief cut out design redirects weight off of sensitive tissue - Waterproof microfabric cover - Dimensions: 250 x 135mm - Weight: 170g
Sunlite 1-Piece Single Chainring w/Double Chain Guard
$15.99
• Replacement for one-piece crank • Steel • Double chain guard • 3/32-inch
Sunlite 5-Speed Freewheel
$14.99
- 5-speed freewheel - 14 – 28T
Sunlite 6-Speed Freewheel
$14.99
- 6-speed freewheel - 14 – 28T
Sunlite 8-Speed Freewheel
$19.99
8-speed SIS compatible freewheel
Sunlite ATB Pedals
$7.99
- Plastic nylon molded body - Chromoly spindle - 318g pair
Sunlite Adjustable Quill Stem
$19.99 - $31.99
Sunlite's Adjustable Quill Stem puts your bars right where you want them. This wonderfully easy-to-use stem adjusts from 0 to +50 degrees—more than enough to help you find your ideal position. And, the 2-bolt clamp holds securely holds your bars.
Sunlite Alloy 2-Bolt Quill Stem
$24.99
• Forged aluminum • Classic streamlined shape • 2-bolt clamp • 180mm tall
Sunlite Alloy 350mm Seatpost
$21.99 - $26.09
• Forged aluminum • Integrated micro-adjust seat clamp
Sunlite Alloy Double Crankset - Road
$49.39 - $58.99
- 8-speed Road crankset - Square taper interface - Does not include BB - Bolt pattern: 110 x 5-bolt - Crank length: 170mm
Sunlite Alloy Double MTN Lever
$16.99
- Designed for linear-pull V-brakes - Pulls two brake cables with one lever - Forged alloy construction - 3 finger - 136 grams each
Sunlite Alloy Seat Quick Release
$8.99 - $9.99
• Quick-release seatpost clamp • Aluminum lever and cap with a 6mm chromoly bolt
Sunlite Alloy Seatpost Shims
$8.99
• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts
Sunlite Aluminum Low Profile Horizontal Square Crankarm (Left)
$23.99 - $24.99
- Horizontal square interface - Only includes left crank
Sunlite Bull Dog Type Caliper
$27.99
- Bulldog-style long-reach side pull brake - Forged alloy construction - Rear caliper only - 238g each
Sunlite Cable End Button
$0.99
Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!
Sunlite Cantilever Brake Link Wire
$3.99
- Replacement link wire for cantilever brakes
Sunlite Cantilever Shoe Eye Bolt
$2.99
- Includes everything needed to mount non-threaded brake pads to cantilever brake arms
Sunlite Cartridge Bearings
$7.99 - $20.99
- DT Swiss cartridge bearings - Sold in pairs
Sunlite Cassette Spacer
$4.99
- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette - Range: 4mm - Color: Silver
Sunlite Chainring Adapter
$1.99
- Steel construction - Adapts BMX chainrings with 22mm hole to 19mm spindles - Bag of 10
Sunlite Chromoly Quill Stem Extender
$14.99
When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.
Sunlite Crank Dust Cap
$1.99
- Crank dust cap - Works with most three-piece crank models
Sunlite Derailleur Hanger
$4.59 - $38.99
- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact
Sunlite Handlebar Shims
$5.59 - $6.99
- Alloy construction - Great for Cruiser or BMX bar conversions
Sunlite Hex Head BB Axle Bolts
$2.99 - $4.99
- With plastic washers - Shell: 8mm Allen head axle bolt
Sunlite Juvenile Pedals
$9.99 - $14.99
- One-piece resin body - Juvenile size platform - Boron spindle - 390g pair
Sunlite Lever Adjusting Barrel
$1.99
- For MTB levers - 7mm x 1mm - Aluminum construction
Sunlite Lever Adjusting Barrel OS
$1.99
- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction
Sunlite MX Juvenile Saddle
$15.99
• Kids' Racing/MX style • Padded • 5.5 x 9 inches
Sunlite Mini Hex
$10.99
- One-piece bottom bracket cup set - Bearings included - Fits smaller american juvenile/youth sized BB - Shell: 65mm - Cup Material: Steel - Weight: 173 grams
Sunlite One-Piece Crankarm
$12.69 - $20.99
- Forged steel - 24 TPI
Sunlite Pillar Suspension Seatpost
$25.99
• Aluminum • Coil spring suspension • Adjustable pre-load design • Collar adjustment for play removal • 7/8-inch seat-clamp diameter
Sunlite Racing Toe Clips
$21.99
- Steel - Quality leather straps included
Sunlite Replacement Bottom Bracket
$39.99
- Steel body - Chromoly spindle - Sealed bearings - Repair BB designed to work in frames that have stripped BB threads - Shell: 68mm - Spindle Type: Square Taper JIS - Weight: 360-370 grams
Sunlite Road/Mountain Shift Cables
$2.99 - $5.59
Shifting cables for Road/Mountain bikes.
Sunlite Rust-Shield Bolts
$0.99
- Rust resistant coating - M5x.80mm Thread pitch - Bag of 10 - Size: M5 x 16 Thread Pitch: Braze-on bolt
Sunlite SCN-SS Single Speed Chain
$15.99
- Individually boxed - SCN-SS An economical replacement chain for single speed - Speeds: 1sp Size: 1/2x1/8 - Links: 142L Color: Black
Sunlite SL-26 BB
$14.99 - $22.99
- Steel body - Steel cups - Chromoly spindle - Sealed bearings - Interface: English - Square Taper JIS - Weight: 305-320 grams
Page 1 of 61 Next page