Parts

- Aheadset preload adjusting bolt

- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX.

- Axle washers for use with 19mm bottom brackets - 19.1x26x2.0mm - Interface: 19mm - Sold in a 10-pack

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

- Rust resistant coating - M5x.80mm Thread pitch - Bag of 10 - Size: M5 x 16 Thread Pitch: Braze-on bolt

- w/Nut - 1-3/4-inch

Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction

- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

Stainless steel pedal washers - Sold in pairs

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

The Master Clamp bolt kit is a custom-designed nut and bolt set that works with most frames using integrated seat clamps and many traditional seat clamps as well. The bolt features a unique head design, that accommodates both a 5mm and 6mm allen key. This seemingly small feature makes things just a little bit simpler because we all know the feeling of grabbing the wrong size allen key wrench. This also means no matter which seat system you use, you'll only need one allen key to adjust the entire seating setup. TECH SPECS - Material: Hardened Steel - Installation: 5mm or 6mm Allen Key - Weight: 0.3oz

Replacement O-ring for the Senec Pedal.

Adjustable headset spacer made from impact-resistant plastic, adjustable to 10mm, 11mm, 12mm, 13mm, and 15mm heights. Product Specifications - Material: Polycarbonate - Height: 10mm, 11mm, 12mm, 13mm, or 15mm - Weight: 0.2oz - Sold individually

A quality 265mm-long straddle cable with lugs on both ends. Works with most modern 990 style brakes. Product Specifications - Length: 265mm - Weight: 0.1oz

- Aluminum w/lock nut - 18mm long/6mm O.D.

- Aluminum w/lock nut and mount - Slotted mount design

- Steel construction - Adapts BMX chainrings with 22mm hole to 19mm spindles - Bag of 10

- Crank dust cap - Works with most three-piece crank models

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

- Chrome - Sold individually

- Type: Lock washer - Size: 1" Keyed

- For MTB levers - 7mm x 1mm - Aluminum construction

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction

- Routes cables underneath the bottom bracket - Will not rust or corrode

- 8x1mm Allen head

- Model: Replacement bolt - Compatibility: Allen, M5x16